Johnson & Johnson companies are equal opportunity employers.
Area Mechanic - 3rd Class - 3rd Shift (1 of 4)-1706140527
Description
Ethicon, Inc., a member of Johnson & Johnson's Family of Companies, is recruiting for an Area Mechanic - 3rd Class, located in San Angelo, TX.
The Area Mechanic - 3rd Class - 3rd Shift will read, interpret and follow work instructions and training materials. Pass and maintain training and certification examinations as required. Read diagrams, sketches, blueprints, diagrams, operation manuals and manufacturing specifications related to assigned equipment. Use process controller programmer systems to maintain programs and to diagnose equipment failures using analysis of relay-ladder-logic programs and other process control language software. Diagnose and identify equipment failures within entire the system (e.g. mechanical, electromechanical, pneumatic or facilities). As required, maintain area support equipment (e.g. ergo lifts/tables, chairs, ladders, etc.). Operate all portable power tools and hand tools in assigned production area; drills, wrenches, grinders and meters to troubleshoot and repair of production equipment. Keep accurate records via computer management systems and/or via manual systems by inputting and retrieving maintenance data, and other pertinent data following standard procedures. Assure that all maintenance work performed on said equipment and spare parts used are captured in Computerized Maintenance Management Systems (CMMS). This individual will be responsible for interpreting computer based diagnostic data for predictive maintenance and other applications. Be accountable to utilize trade knowledge and familiarity with plant and equipment for leading a continuous improvement program on specified equipment. This will include recommending, and participating in equipment improvements, Planned Maintenance (PM) process improvements and Overall Equipment Effectiveness (OEE) tracking/trending. Work as member of the Ethicon Performance Excellence (EPS), Manufacturing Equipment Excellence (ME2), or Lean team to achieve specific goals. Follow current compliance regulations and standards.
The Area Mechanic will perform all work within ISO 14001 principles and environmental regulatory compliance requirements, safety requirements inherent to chemical process and within all safety codes, including but not limited to Occupational Safety Health and Health Administration (OSHA) and applicable building and safety codes, Ethicon requirements, etc. Work within engineering safety guidelines, checking with engineering on material and operation acceptability of all parts used inside classified hazardous areas. Modifications that impact personal or process safety must be reviewed by the Safety Audit Team prior to implementation. Independently recognize and solve problems with the ability to make critical decisions under pressure on breakdowns and works towards effectively managing deadlines in completing breakdown, maintenance and project activities. Demonstrate the ability to work with, and communicate well with others, ability to give and understand instructions, both verbal and written. Coordinate, instruct, advise and train other craft personnel as needed. Maintain general housekeeping within the department, keeping equipment and work area clean and orderly. Maintain inventory of spare parts and notify supervisor when parts are needed. Perform other work related duties as assigned.
The Area Mechanic will operate all portable power tools and hand tools in assigned production area; drills, wrenches, grinders and meters to troubleshoot and repair of production equipment. Perform emergency repair, routine and scheduled maintenance overhauls and changeovers on production equipment with limited direction. Utilize electromechanical knowledge to be used in problem diagnosis and solutions. Utilize plumbing skills for repair and installation to include, hard plumbing. Interpret blueprints for the purpose of maintenance and repair. Work towards effectively managing deadlines in completing breakdown, maintenance and project activities. Make critical decisions under pressure on breakdowns. Performs preventive maintenance and minor adjustments.
Under general supervision and in accordance to prescribed procedures and requirements, the Area Mechanic will perform complete maintenance support including, but not limited to, installation, diagnosis, troubleshooting, adjustments, repair, preventive and emergency maintenance as well as continuous improvement. Work on all equipment, such as hydraulic components, electric motors, printers, etc. In addition to all mechanical tasks, this individual will be responsible for the recording and maintenance of all critical data and documentation. This position focuses on continuous improvement and maximum efficiency from the machinery, ensuring maximum machine utilization, and minimum departmental non-production time.
After a suitable training period, the Area Mechanic must have an understanding of processes and a working knowledge of the related equipment including the process facilities, air handlers, pumps, compressors, etc. Coordinate, instruct, advise and train others as needed. It is expected that the individual's knowledge should increase with the time spent with the process and the training received. Associates are held accountable for production efficiencies, strict compliance with process specifications and Company standards of behavior. This position pays $18.19/hour and is under a Collective Bargaining Agreement in a union environment.
The San Angelo Plant is a 24/7 operation; weekends and holidays are included in the work schedule.
Qualifications
A minimum of a High school diploma, G.E.D. or equivalent required. A minimum of 2 years of experience and/or training in the maintenance of machinery to produce or repair parts, tools and/or equipment is required. Experience working in a Good Manufacturing Practice (GMP) environment preferred. Mechanical skills required. The ability to operate power tools and hand tools is required. The ability to read and understand blueprints is required. Knowledge of design/drafting with ability to clearly and accurately annotate schematic diagrams is preferred. Experience retrieving work orders from Maximo preferred. Must have excellent communication and interpersonal skills. Must be a team player and be able to work with minimal technical supervision. Experience with automated equipment preferred. Experience with pneumatics and hydraulics preferred. Experience working with vacuums, steam, piping, nitrogen and plumbing preferred. Process Excellence experience preferred. Must be willing to obtain Yellow Belt training/certification. Must be a certified forklift operator or be willing to become certified. Must be willing to be trained on the usage of a Respirator. Must be able to work rotating night shifts (3rd Shift) (6:00 pm - 6:30 am), which will include alternating weekends. The ability to work occasional overtime, weekends and some holidays as needed by business is required. Successful completion of WORKKEYS (skills assessment) with scores of (5) or higher on all Ethicon required modules.
BE VITAL in your career. Be seen for the talent you bring to your work. Explore opportunities within the Johnson & Johnson Family of Companies.
Primary Location:North America-United States-Texas-San Angelo
Organization: Ethicon Inc. (6045)
Job Function: Industrial Manufacturing
Relocation: Eligible No
Certain sites within the Johnson & Johnson Family of Companies participate in E-Verify as appropriate in accordance with Company guidelines and federal or state law. To learn more about the government sponsored program and to see a list of the sites that are currently enrolled, please click here.
Johnson and Johnson Family of Companies are equal opportunity employers, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status, or any other characteristic protected by law.
EEO is the Law
EEO is the Law GINA Supplement
Area Mechanic - 3rd Class - 3rd Shift (1 of 4)-1706140527
Description
Ethicon, Inc., a member of Johnson & Johnson's Family of Companies, is recruiting for an Area Mechanic - 3rd Class, located in San Angelo, TX.
The Area Mechanic - 3rd Class - 3rd Shift will read, interpret and follow work instructions and training materials. Pass and maintain training and certification examinations as required. Read diagrams, sketches, blueprints, diagrams, operation manuals and manufacturing specifications related to assigned equipment. Use process controller programmer systems to maintain programs and to diagnose equipment failures using analysis of relay-ladder-logic programs and other process control language software. Diagnose and identify equipment failures within entire the system (e.g. mechanical, electromechanical, pneumatic or facilities). As required, maintain area support equipment (e.g. ergo lifts/tables, chairs, ladders, etc.). Operate all portable power tools and hand tools in assigned production area; drills, wrenches, grinders and meters to troubleshoot and repair of production equipment. Keep accurate records via computer management systems and/or via manual systems by inputting and retrieving maintenance data, and other pertinent data following standard procedures. Assure that all maintenance work performed on said equipment and spare parts used are captured in Computerized Maintenance Management Systems (CMMS). This individual will be responsible for interpreting computer based diagnostic data for predictive maintenance and other applications. Be accountable to utilize trade knowledge and familiarity with plant and equipment for leading a continuous improvement program on specified equipment. This will include recommending, and participating in equipment improvements, Planned Maintenance (PM) process improvements and Overall Equipment Effectiveness (OEE) tracking/trending. Work as member of the Ethicon Performance Excellence (EPS), Manufacturing Equipment Excellence (ME2), or Lean team to achieve specific goals. Follow current compliance regulations and standards.
The Area Mechanic will perform all work within ISO 14001 principles and environmental regulatory compliance requirements, safety requirements inherent to chemical process and within all safety codes, including but not limited to Occupational Safety Health and Health Administration (OSHA) and applicable building and safety codes, Ethicon requirements, etc. Work within engineering safety guidelines, checking with engineering on material and operation acceptability of all parts used inside classified hazardous areas. Modifications that impact personal or process safety must be reviewed by the Safety Audit Team prior to implementation. Independently recognize and solve problems with the ability to make critical decisions under pressure on breakdowns and works towards effectively managing deadlines in completing breakdown, maintenance and project activities. Demonstrate the ability to work with, and communicate well with others, ability to give and understand instructions, both verbal and written. Coordinate, instruct, advise and train other craft personnel as needed. Maintain general housekeeping within the department, keeping equipment and work area clean and orderly. Maintain inventory of spare parts and notify supervisor when parts are needed. Perform other work related duties as assigned.
The Area Mechanic will operate all portable power tools and hand tools in assigned production area; drills, wrenches, grinders and meters to troubleshoot and repair of production equipment. Perform emergency repair, routine and scheduled maintenance overhauls and changeovers on production equipment with limited direction. Utilize electromechanical knowledge to be used in problem diagnosis and solutions. Utilize plumbing skills for repair and installation to include, hard plumbing. Interpret blueprints for the purpose of maintenance and repair. Work towards effectively managing deadlines in completing breakdown, maintenance and project activities. Make critical decisions under pressure on breakdowns. Performs preventive maintenance and minor adjustments.
Under general supervision and in accordance to prescribed procedures and requirements, the Area Mechanic will perform complete maintenance support including, but not limited to, installation, diagnosis, troubleshooting, adjustments, repair, preventive and emergency maintenance as well as continuous improvement. Work on all equipment, such as hydraulic components, electric motors, printers, etc. In addition to all mechanical tasks, this individual will be responsible for the recording and maintenance of all critical data and documentation. This position focuses on continuous improvement and maximum efficiency from the machinery, ensuring maximum machine utilization, and minimum departmental non-production time.
After a suitable training period, the Area Mechanic must have an understanding of processes and a working knowledge of the related equipment including the process facilities, air handlers, pumps, compressors, etc. Coordinate, instruct, advise and train others as needed. It is expected that the individual's knowledge should increase with the time spent with the process and the training received. Associates are held accountable for production efficiencies, strict compliance with process specifications and Company standards of behavior. This position pays $18.19/hour and is under a Collective Bargaining Agreement in a union environment.
The San Angelo Plant is a 24/7 operation; weekends and holidays are included in the work schedule.
Qualifications
A minimum of a High school diploma, G.E.D. or equivalent required. A minimum of 2 years of experience and/or training in the maintenance of machinery to produce or repair parts, tools and/or equipment is required. Experience working in a Good Manufacturing Practice (GMP) environment preferred. Mechanical skills required. The ability to operate power tools and hand tools is required. The ability to read and understand blueprints is required. Knowledge of design/drafting with ability to clearly and accurately annotate schematic diagrams is preferred. Experience retrieving work orders from Maximo preferred. Must have excellent communication and interpersonal skills. Must be a team player and be able to work with minimal technical supervision. Experience with automated equipment preferred. Experience with pneumatics and hydraulics preferred. Experience working with vacuums, steam, piping, nitrogen and plumbing preferred. Process Excellence experience preferred. Must be willing to obtain Yellow Belt training/certification. Must be a certified forklift operator or be willing to become certified. Must be willing to be trained on the usage of a Respirator. Must be able to work rotating night shifts (3rd Shift) (6:00 pm - 6:30 am), which will include alternating weekends. The ability to work occasional overtime, weekends and some holidays as needed by business is required. Successful completion of WORKKEYS (skills assessment) with scores of (5) or higher on all Ethicon required modules.
BE VITAL in your career. Be seen for the talent you bring to your work. Explore opportunities within the Johnson & Johnson Family of Companies.
Primary Location:North America-United States-Texas-San Angelo
Organization: Ethicon Inc. (6045)
Job Function: Industrial Manufacturing
Relocation: Eligible No
Certain sites within the Johnson & Johnson Family of Companies participate in E-Verify as appropriate in accordance with Company guidelines and federal or state law. To learn more about the government sponsored program and to see a list of the sites that are currently enrolled, please click here.
Johnson and Johnson Family of Companies are equal opportunity employers, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status, or any other characteristic protected by law.
EEO is the Law
EEO is the Law GINA Supplement