Manufacturing Engineer CNC-1407201W
Description
JOB DESCRIPTION
JOB TITLE: Manufacturing Engineer – CNC / Applications Engineer
DEPARTMENT: Engineering
REPORTS TO: MANUFACTURING ENGINEERING MANAGER / Project Director
ORGANISATIONAL INTERFACES: Engineering, Operations, QA, Maintenance, Facilities, Toolroom and Outside Suppliers and other DePuy Manufacture and Design Sites.
JOB PURPOSE:
The position is part of a team within the Engineering department that involves the development, validation and production launch of manufacturing processes against targeted project milestones. This position will provide technical and project leadership on key manufacturing processes and risk mitigation initiatives and will also include liaison with outside suppliers and other DePuy Design & Manufacturing sites to ensure all goals and targets of the manufacturing process transfer are achieved
PRINCIPLE ACCOUNTABILITIES:
• Deliver key projects to the Value Stream which will positively impact on the key metrics.
• Support business key metrics with ongoing process improvements and introduction of new manufacturing processes and technologies.
• Support the manufacturing process development to meet project milestones and to allow operations to meet its targets.
• Drive process improvements/capacity increases through new technology / equipment introductions.
• Competent in validation requirements on new equipment introductions / processes / process changes.
• Design & develop tools, fixtures, gages and special equipment for manufacturing operations and new product / process introductions in conjunction with Toolroom Technicians and process Engineers.
• Identify capital spend and budget requirements for process improvements.
• Preparation and maintenance of all relevant manufacturing specifications.
• Preparation and project management of all line extensions / NPI including supporting documentation as reqd.
• Focus on reduction of unit cost of production, through accountability for specific cells Support ongoing Safety Incident corrective actions and ERGO team initiatives/actions
Cost
• Identify and lead cost and technical improvements under the departments continuous improvement program.
• Provide key inputs and leadership into transformational process developments.
• Determine equipment layouts for manufacturing cells using Lean Manufacturing tool as identified.
Supply
• Project Management - provide timely and accurate reporting on project activities.
• Lead or actively participate in cross-functional teams to ensure New Product Introduction projects are completed in a timely and efficient manner.
People
• Actively interfacing with cross-functional team members, always practicing good team work in support of day to day operating requirements.
• Demonstrate strong leadership and a clear identifiable work ethos within the Projects Engineering team.
• Develop and maintain a Credo & Behavioural Standards based culture within the Projects Engineering group.
Quality
• Preparation and maintenance of manufacturing specifications for specific projects.
• Ensure effective closure on Quality System documents (Audit Actions, NCR’s, CAPA’s, etc).
• Ensure all process developments, NPI etc are managed in accordance with the Quality management system.
HSE&E
• Ensure all production equipment meets all J&J Health & Safety requirements by the completion of required documentation.
• Implementation of safety/environmental requirements on purchase of all new equipment.
Strategic
• Work with team leader to develop and implement strategic engineering Goals & Objectives.
• Support the implementation of all engineering and plant strategic initiatives.
KEY COMPETENCIES REQUIRED (TO PERFORM THE JOB TO ACCEPTABLE STANDARD)
Personal Traits
• Ability to manage multiple assignments or projects with sound analytical, troubleshooting, and problem solving skills.
• Flexible work ethic.
• Strong influencing skills.
• Excellent communication skills (written and oral).
• Problem Solving skills – to assist in maintaining project progress and on design issues.
• Decision Making – required to make decisions on technical issues.
• Degree of responsibility – must be capable of taking direction and taking responsibility and ownership for systems.
• Excellent planning & organisation skills.
• Extent of confidentiality - discretion is essential in view of contact with outside parties, product development strategies, regulatory and sales information.
• Continuous Improvement Focus
Qualifications
QUALIFICATIONS & EXPERIENCE:
Essential
• Experience in regulated industry, FDA, ISO, etc.
• CNC operation & programming experience (preferably Mazak / Mori Seiki), CAD / CAM experience
Desirable
• Degree qualified in a relevant Engineering / Science discipline, with 2+ years relevant experience.
• Experience in Validation of equipment and implementation of manufacturing processes is desired.
• Proven track record in development and Installation of manufacturing processes for Product Transfer.
• Certified Six Sigma qualifications.
• UG (Unigraphics) experience is desirable
• Proficiency of GD&T and ASME Y14.5M 1994 standards
Primary Location:Europe/Middle East/Africa-Ireland-Cork-Cork
Organization: Depuy (Ireland) Limited (7386)
Job Function: Engineering (Generalist)
Description
JOB DESCRIPTION
JOB TITLE: Manufacturing Engineer – CNC / Applications Engineer
DEPARTMENT: Engineering
REPORTS TO: MANUFACTURING ENGINEERING MANAGER / Project Director
ORGANISATIONAL INTERFACES: Engineering, Operations, QA, Maintenance, Facilities, Toolroom and Outside Suppliers and other DePuy Manufacture and Design Sites.
JOB PURPOSE:
The position is part of a team within the Engineering department that involves the development, validation and production launch of manufacturing processes against targeted project milestones. This position will provide technical and project leadership on key manufacturing processes and risk mitigation initiatives and will also include liaison with outside suppliers and other DePuy Design & Manufacturing sites to ensure all goals and targets of the manufacturing process transfer are achieved
PRINCIPLE ACCOUNTABILITIES:
• Deliver key projects to the Value Stream which will positively impact on the key metrics.
• Support business key metrics with ongoing process improvements and introduction of new manufacturing processes and technologies.
• Support the manufacturing process development to meet project milestones and to allow operations to meet its targets.
• Drive process improvements/capacity increases through new technology / equipment introductions.
• Competent in validation requirements on new equipment introductions / processes / process changes.
• Design & develop tools, fixtures, gages and special equipment for manufacturing operations and new product / process introductions in conjunction with Toolroom Technicians and process Engineers.
• Identify capital spend and budget requirements for process improvements.
• Preparation and maintenance of all relevant manufacturing specifications.
• Preparation and project management of all line extensions / NPI including supporting documentation as reqd.
• Focus on reduction of unit cost of production, through accountability for specific cells Support ongoing Safety Incident corrective actions and ERGO team initiatives/actions
Cost
• Identify and lead cost and technical improvements under the departments continuous improvement program.
• Provide key inputs and leadership into transformational process developments.
• Determine equipment layouts for manufacturing cells using Lean Manufacturing tool as identified.
Supply
• Project Management - provide timely and accurate reporting on project activities.
• Lead or actively participate in cross-functional teams to ensure New Product Introduction projects are completed in a timely and efficient manner.
People
• Actively interfacing with cross-functional team members, always practicing good team work in support of day to day operating requirements.
• Demonstrate strong leadership and a clear identifiable work ethos within the Projects Engineering team.
• Develop and maintain a Credo & Behavioural Standards based culture within the Projects Engineering group.
Quality
• Preparation and maintenance of manufacturing specifications for specific projects.
• Ensure effective closure on Quality System documents (Audit Actions, NCR’s, CAPA’s, etc).
• Ensure all process developments, NPI etc are managed in accordance with the Quality management system.
HSE&E
• Ensure all production equipment meets all J&J Health & Safety requirements by the completion of required documentation.
• Implementation of safety/environmental requirements on purchase of all new equipment.
Strategic
• Work with team leader to develop and implement strategic engineering Goals & Objectives.
• Support the implementation of all engineering and plant strategic initiatives.
KEY COMPETENCIES REQUIRED (TO PERFORM THE JOB TO ACCEPTABLE STANDARD)
Personal Traits
• Ability to manage multiple assignments or projects with sound analytical, troubleshooting, and problem solving skills.
• Flexible work ethic.
• Strong influencing skills.
• Excellent communication skills (written and oral).
• Problem Solving skills – to assist in maintaining project progress and on design issues.
• Decision Making – required to make decisions on technical issues.
• Degree of responsibility – must be capable of taking direction and taking responsibility and ownership for systems.
• Excellent planning & organisation skills.
• Extent of confidentiality - discretion is essential in view of contact with outside parties, product development strategies, regulatory and sales information.
• Continuous Improvement Focus
Qualifications
QUALIFICATIONS & EXPERIENCE:
Essential
• Experience in regulated industry, FDA, ISO, etc.
• CNC operation & programming experience (preferably Mazak / Mori Seiki), CAD / CAM experience
Desirable
• Degree qualified in a relevant Engineering / Science discipline, with 2+ years relevant experience.
• Experience in Validation of equipment and implementation of manufacturing processes is desired.
• Proven track record in development and Installation of manufacturing processes for Product Transfer.
• Certified Six Sigma qualifications.
• UG (Unigraphics) experience is desirable
• Proficiency of GD&T and ASME Y14.5M 1994 standards
Primary Location:Europe/Middle East/Africa-Ireland-Cork-Cork
Organization: Depuy (Ireland) Limited (7386)
Job Function: Engineering (Generalist)