Johnson & Johnson companies are equal opportunity employers.
SENIOR PRODUCT DEVELOPMENT ENGINEER-1159140428
Description
The Ethicon Surgical Care business a member of Johnson & Johnson's Family of Companies, is currently recruiting for Senior R&D Product Development Engineer located in Cincinnati, OH.
The Ethicon Surgical Care business offers a broad range of products, platforms and technologies—including sutures, surgical staplers, clip appliers, trocars and synthetic mesh devices—that are used in a wide variety of minimally invasive and open surgical procedures. Specialties include support for treatment of colorectal and thoracic conditions, women’s health conditions, hernias, cancer and obesity. The Ethicon Surgical Care business combines products and services of two market leading legacy companies, both with long histories of medical innovation. Ethicon, Inc. based in Somerville, New Jersey, was founded more than 80 years ago as a pioneer in suture development and manufacturing, helping to transform the safety and electiveness of open surgery. Ethicon Endo-Surgery, Inc. was created 20 years ago in Cincinnati, Ohio, developing innovative devices that have driven the revolutionary shift from open to minimally invasive surgery that continues to lead the industry today.
The R&D Product Development Engineer is responsible for acting as a team member on product development projects conducting various assignments in cooperation with direction of team & team leader.
Responsibilities: Complete assignments involving a specific phase of an engineering project which may include design, development, testing. May assist in determining objectives & planning schedules of specific task within a given project. Conduct assignments encompassing entire project or a large portion of a major project. Co-ordinate activities with internal & external customers. Apply comprehensive & diverse knowledge of engineering principles to a broad range of assignments. Plan, conduct & direct engineering assignments to completion. May co-ordinate, direct activities of other technical support staff & be responsible for their assignments. TRAVEL REQUIREMENTS: Domestic & international travel, as required.
Other responsibilities may be assigned & not all responsibilities listed may be assigned.
Qualifications
A Bachelor of Science in Engineering with a minimum of 5 years experience is required for this position. A Degree in Mechanical, Electrical, Electro/Mechanical or Electronics is a plus. A Master’s degree is preferred. A Medical Device experience is an asset for this role.
Design for Manufacturability & Assembly, Technical Writing and Documentation, Design for Six Sigma, Process Development and Geometric Dimensioning & Tolerance (GD&T) Analysis are required.
The following are skills that are desirable for this role: Ability to create designs for production and fabrication, Assembly Process Development. Experience with, Elastomeric components, Electronic Components. Equipment design, Metal Stamping, Metal Injection Molding, Plastic Injection Molding, Experience with managing outside vendors and suppliers, Experience in a regulated industry, Experience solving technical manufacturing issues of electro-mechanical products in a high volume, production environment, Good Manufacturing Practice (GMP), Green/Black Belt Certified, Lean Manufacturing Principals/Certification, Medical Device experience, Metals & Plastics component process development, Process Characterization, Risk Analysis – Failure Modes and Effects Analysis (FMEA), Statistical Process Control, Tooling experience
If you want to explore the many small-company environments behind the big-company impact of the Johnson & Johnson Family of Companies, bid on this position today!
Johnson & Johnson is committed to diversity and invites all interested candidates to apply for positions of interest. EOE M/F/D/V
Please note: In order to be considered eligible for an interview, candidates must apply online through the appropriate web portal.
BE VITAL in your career, Be seen for the talent you bring to your work. Explore opportunities within the Johnson & Johnson Family of Companies.
J2W:LI
Primary Location:North America-United States-Ohio-Cincinnati
Organization: Ethicon Endo Surgery Inc (6041)
Job Function: R&D Engineering (R&D)
Certain sites within the Johnson & Johnson Family of Companies participate in E-Verify as appropriate in accordance with Company guidelines and federal or state law. To learn more about the government sponsored program and to see a list of the sites that are currently enrolled, please click here.
Johnson and Johnson Family of Companies are equal opportunity employers, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status, or any other characteristic protected by law.
EEO is the Law
EEO is the Law GINA Supplement
SENIOR PRODUCT DEVELOPMENT ENGINEER-1159140428
Description
The Ethicon Surgical Care business a member of Johnson & Johnson's Family of Companies, is currently recruiting for Senior R&D Product Development Engineer located in Cincinnati, OH.
The Ethicon Surgical Care business offers a broad range of products, platforms and technologies—including sutures, surgical staplers, clip appliers, trocars and synthetic mesh devices—that are used in a wide variety of minimally invasive and open surgical procedures. Specialties include support for treatment of colorectal and thoracic conditions, women’s health conditions, hernias, cancer and obesity. The Ethicon Surgical Care business combines products and services of two market leading legacy companies, both with long histories of medical innovation. Ethicon, Inc. based in Somerville, New Jersey, was founded more than 80 years ago as a pioneer in suture development and manufacturing, helping to transform the safety and electiveness of open surgery. Ethicon Endo-Surgery, Inc. was created 20 years ago in Cincinnati, Ohio, developing innovative devices that have driven the revolutionary shift from open to minimally invasive surgery that continues to lead the industry today.
The R&D Product Development Engineer is responsible for acting as a team member on product development projects conducting various assignments in cooperation with direction of team & team leader.
Responsibilities: Complete assignments involving a specific phase of an engineering project which may include design, development, testing. May assist in determining objectives & planning schedules of specific task within a given project. Conduct assignments encompassing entire project or a large portion of a major project. Co-ordinate activities with internal & external customers. Apply comprehensive & diverse knowledge of engineering principles to a broad range of assignments. Plan, conduct & direct engineering assignments to completion. May co-ordinate, direct activities of other technical support staff & be responsible for their assignments. TRAVEL REQUIREMENTS: Domestic & international travel, as required.
Other responsibilities may be assigned & not all responsibilities listed may be assigned.
Qualifications
A Bachelor of Science in Engineering with a minimum of 5 years experience is required for this position. A Degree in Mechanical, Electrical, Electro/Mechanical or Electronics is a plus. A Master’s degree is preferred. A Medical Device experience is an asset for this role.
Design for Manufacturability & Assembly, Technical Writing and Documentation, Design for Six Sigma, Process Development and Geometric Dimensioning & Tolerance (GD&T) Analysis are required.
The following are skills that are desirable for this role: Ability to create designs for production and fabrication, Assembly Process Development. Experience with, Elastomeric components, Electronic Components. Equipment design, Metal Stamping, Metal Injection Molding, Plastic Injection Molding, Experience with managing outside vendors and suppliers, Experience in a regulated industry, Experience solving technical manufacturing issues of electro-mechanical products in a high volume, production environment, Good Manufacturing Practice (GMP), Green/Black Belt Certified, Lean Manufacturing Principals/Certification, Medical Device experience, Metals & Plastics component process development, Process Characterization, Risk Analysis – Failure Modes and Effects Analysis (FMEA), Statistical Process Control, Tooling experience
If you want to explore the many small-company environments behind the big-company impact of the Johnson & Johnson Family of Companies, bid on this position today!
Johnson & Johnson is committed to diversity and invites all interested candidates to apply for positions of interest. EOE M/F/D/V
Please note: In order to be considered eligible for an interview, candidates must apply online through the appropriate web portal.
BE VITAL in your career, Be seen for the talent you bring to your work. Explore opportunities within the Johnson & Johnson Family of Companies.
J2W:LI
Primary Location:North America-United States-Ohio-Cincinnati
Organization: Ethicon Endo Surgery Inc (6041)
Job Function: R&D Engineering (R&D)
Certain sites within the Johnson & Johnson Family of Companies participate in E-Verify as appropriate in accordance with Company guidelines and federal or state law. To learn more about the government sponsored program and to see a list of the sites that are currently enrolled, please click here.
Johnson and Johnson Family of Companies are equal opportunity employers, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status, or any other characteristic protected by law.
EEO is the Law
EEO is the Law GINA Supplement